% ------------------------------------------------------------------------
% EMTS 2016 Paper Template
%
% This template is based on IEEEtran (V1.8b) and the previous EMTS
% template, which carries the following copyright notice:
%
%   Sample Conference Paper using IEEE LaTeX style file for A4 pagesize.
%   Copyright (C) 2006-2008 Causal Productions Pty Ltd.
%   Permission is granted to distribute and revise this file provided that
%   this header remains intact.
%
% The modifications for EMTS 2016 are hereby placed in the public
% domain. Feel free to reuse for other conferences.
% ------------------------------------------------------------------------

% IEEE style conference paper on A4 paper in 10pt Times
\documentclass[conference, a4paper]{IEEEtran}
\usepackage{times}

% optional, but highly useful packages
\usepackage{graphicx}
\usepackage{cite}
\usepackage{amsmath}
\interdisplaylinepenalty=2500

% Add more packages and personal macros as needed, but ensure that
% they do not interfere with the fonts and page layout. Do not add
% hyperlinks.

\begin{document}

% Explicit linebreaks \\ can be added in the title. Do not put math or
% special symbols in the title.
\title{EMTS 2016 Paper Template} 

% Keep the affiliations short but complete. E-mail is mandatory for
% the corresponding author. The \IEEEauthorrefmark{} can be omitted,
% if all authors share the same affiliation.
\author{\IEEEauthorblockN{%
    First Author\IEEEauthorrefmark{1},
    Second Author\IEEEauthorrefmark{2},
    First M. Lastname\IEEEauthorrefmark{3}, and
    Fourth Author\IEEEauthorrefmark{2}}
  \medskip
  \IEEEauthorblockA{\IEEEauthorrefmark{1}School of Electrical
    Engineering, Example University, USA\\
    e-mail: first.author@example.org}
  \IEEEauthorblockA{\IEEEauthorrefmark{2}%
    Second Company, Address Including Country\\
    e-mails: second@example.com, fml@example.com}
  \IEEEauthorblockA{\IEEEauthorrefmark{3}%
    Third University, Some Town, Somewhere}}

\maketitle

% Do not use any symbols, special characters or math in the abstract.
\begin{abstract}
  Please include a brief abstract here. The abstract should concisely
  describe the main results of the paper. Your submitted paper must
  conform to this template and be in IEEE Xplore compatible
  PDF-format.
\end{abstract}

% Keywords are not needed.

\section{Introduction}

Please use this \LaTeX{} template, or the corresponding MS Word
template, for preparing your paper submission to EMTS 2016. Do not
adjust any margins, fonts, etc. The submitted paper must be 2--4 pages
in IEEE Xplore compatible PDF-format.

\section{Brief Guidelines}

Please use the following guidelines and refer to the file
\texttt{IEEEtran\_HOWTO.pdf} for more technical details.

\subsection{Title and Author Details}
\label{sec:title}

All title and author details must be in single-column format and must
be centered. The first letter of each word in a title must be
capitalized except for short minor words such as ``a'', ``an'',
``and'', ``as'', ``at'', ``by'', ``for'', ``from'', ``if'', ``in'',
``into'', ``on'', ``or'', ``of'', ``the'', ``to'', and ``with''.

Author details must not show any professional or academic titles or
memberships. Each affiliation must include, at the very least, the
name of the company or university and the name of the country where
the author is based. E-mail address is compulsory for the
corresponding author.

\subsection{Section Headings}

The template supports three levels of headings: section, subsection
and subsubsection, but the third level is probably not very useful in
a short paper. The first letter of each word in a heading should be
capitalized except for short minor words as listed in
Section~\ref{sec:title}.

\subsection{Figures and Tables}

Figures and tables must be centered in the column. Large figures and
tables may span across both columns. Any table or figure that spans
two columns must be positioned either at the top or at the bottom of the
page. Figure captions are placed below the figures, while table
captions are placed above the tables. All figures and tables must be
referenced in the text. (See Fig.~\ref{fig:sample_graph} and
Fig.~\ref{fig:hires-photo}.) Graphics may be in full color. Ensure that the
resolution is adequate and that the fonts are of reasonable size. 

\begin{figure}[t]
    \centering
    \includegraphics[width=68.7mm]{fig_1}
    \caption{A sample line graph using colors which contrast well both
      on screen and on a black-and-white hardcopy.}
    \label{fig:sample_graph}
\end{figure}

\begin{figure}[t]
    \centering
    \includegraphics[height=64.54mm]{hires_photo}
    \caption{Example of an image with acceptable resolution.}
    \label{fig:hires-photo}
\end{figure}

\subsection{Equations}

All displayed equations should be labeled in numerical
order. Punctuate equations when they are part of a sentence, as in
\begin{equation}
  \label{eq:faraday}
  \nabla\times\mathbf E = -\frac{\partial \mathbf B}{\partial t},
\end{equation}
where $\mathbf E$ is the electric field intensity and\dots

Ensure that all nontrivial symbols are properly defined. Refer to
equations using numbers, e.g., ``from~\eqref{eq:faraday}
follows\dots''

\subsection{References}

Number the reference items consecutively in square brackets following
the usual IEEE style. When citing a reference, simply use the
reference number, as in~\cite{IEEEexample:book}.  Do not add ``Ref.''
or ``Reference'' except at the beginning of a sentence, e.g.,
``Reference~\cite{IEEEexample:article_typical} shows\dots''.  Multiple
references can be grouped together like~\cite{IEEEexample:book,
  IEEEexample:confwithpaper,  IEEEexample:shellCTANpage, IEEEexample:uspat}.

Examples of references show below include: a book~\cite{IEEEexample:book}, a journal
article~\cite{IEEEexample:article_typical}, a conference
paper~\cite{IEEEexample:confwithpaper}, a web
page~\cite{IEEEexample:shellCTANpage}, a patent~\cite{IEEEexample:uspat},
a master's thesis~\cite{IEEEexample:masterstype},
a technical report~\cite{IEEEexample:techreptype}, 
a datasheet~\cite{IEEEexample:datasheet}, and a
standard~\cite{IEEEexample:standard}.

% Shrink the final page to force the columns to be balanced. This
% command must be in the first column of the last page. Start by
% setting the value to 0mm and slowly increase it until the columns
% balance.
\enlargethispage{-154mm}


\subsection{Last Page Column Equalization}

Add the command \verb|\enlargethispage{-XXmm}| somewhere near the top
of the first column of the last page to make the columns on the last
page approximately equal in height.

\section*{Acknowledgment}

Include acknowledgments here, if needed. Do not use a footnote on the
first page.


% BibTeX is highly recommended for the bibliography.
% Add your own .bib-file(s) instead of IEEEexample.
% See IEEEtran_bst_HOWTO.pdf for more detailed instructions.
\bibliographystyle{IEEEtran}
\bibliography{IEEEabrv,IEEEexample}

% Comment out the above and uncomment the following, if you prefer to
% write the bibliography manually. Ensure that the references follow
% the IEEE style with abbreviated journal names. 
%
% \begin{thebibliography}{1}
%
% \bibitem{IEEEexample:book}
% S.~M. Metev and V.~P. Veiko, \emph{Laser Assisted Microtechnology}, 2nd~ed.,
%   R.~M. Osgood, Jr., Ed.\hskip 1em plus 0.5em minus 0.4em\relax Berlin,
%   Germany: Springer-Verlag, 1998.
%
% \bibitem{IEEEexample:article_typical}
% S.~Zhang, C.~Zhu, J.~K.~O. Sin, and P.~K.~T. Mok, ``A novel ultrathin elevated
%   channel low-temperature poly-{Si} {TFT},'' \emph{{IEEE} Electron Device
%   Lett.}, vol.~20, pp. 569--571, Nov. 1999.
%
% \bibitem{IEEEexample:confwithpaper}
% M.~Wegmuller, J.~P. von~der Weid, P.~Oberson, and N.~Gisin, ``High resolution
%   fiber distributed measurements with coherent {OFDR},'' in \emph{Proc.
%   {ECOC}'00}, 2000, paper 11.3.4, p. 109.
%
% \bibitem{IEEEexample:shellCTANpage}
% M.~Shell. (2008) {IEEE}tran webpage on {CTAN}. [Online]. Available:
%   http://www.ctan.org/tex-archive/macros/latex/contrib/IEEEtran/
%
% \bibitem{IEEEexample:uspat}
% R.~E. Sorace, V.~S. Reinhardt, and S.~A. Vaughn, ``High-speed digital-to-{RF}
%   converter,'' U.S. Patent 5\,668\,842, Sep. 16, 1997.
%
% \bibitem{IEEEexample:masterstype}
% A.~Karnik, ``Performance of {TCP} congestion control with rate feedback:
%   {TCP/ABR} and rate adaptive {TCP/IP},'' M. Eng. thesis, Indian Institute of
%   Science, Bangalore, India, Jan. 1999.
%
% \bibitem{IEEEexample:techreptype}
% J.~Padhye, V.~Firoiu, and D.~Towsley, ``A stochastic model of {TCP} {R}eno
%   congestion avoidance and control,'' Univ. of Massachusetts, Amherst, MA,
%   CMPSCI Tech. Rep. 99-02, 1999.
%
%\bibitem{IEEEexample:datasheet}
%``{PDCA12-70} data sheet,'' Opto Speed SA, Mezzovico, Switzerland.
%
% \bibitem{IEEEexample:standard}
% \emph{Wireless {LAN} Medium Access Control {(MAC)} and Physical Layer {(PHY)}
%   Specification}, IEEE Std. 802.11, 1997.
%
% \end{thebibliography}

\end{document}
